
HB 018 BENDS AND FITTINGS FRICTION
GENERAL DESCRIPTION
The equipment measures pressure drops at various flow rates when water flow through different pipe bends, and fittings. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
All bends and fittings are connected in series with pressure tappings on both sides of each device. A water manometer with a vent valve and a hand air pump is connected to these tappings. A valve at the outlet is used to control outlet pressure.
TYPICAL EXPERIMENTS
- Determination of Pressure Drop across various pipes and fittings at differing flow rates.
- Estimation of Loss Coefficient (K) or various pipes, pipe fittings and valve settings
TECHNICAL DATA
Pipe diameter (nominal) | 20 mm. |
Enlarged pipe diameter (nominal) | 35 mm. |
Bends | 90º Miter bend , 90º small radius bend , 90º large radius bend |
Fittings | 90º Elbow , 45º elbows , Sudden expansion , Sudden contraction |
Water manometer | 8 tubes x 450 mm x 1 mm graduation |
OPTIONAL EQUIPMENT
Part No. | Part Name |
---|---|
HF 010 | Variable area flow meter |
A gate valve with pressure gauges | |
Other optional equipment please contact manufacturer (essom@essom.com) |
Net (unassembled) Shipping Dimensions WxLxH | 36 x 55 x 80 cm. |
Net Weight | Approx. 13 kg. |