HF 507 TILTING FLOW CHANNEL, 75 mm. wide
GENERAL DESCRIPTION

This is a self contained open channel designed for studying flow phenomena. It is to be used with optional accessories and models below.

The channel is of rectangular cross section supported by a steel frame. Side walls are transparent to allow full visual observation. Tilting can be adjusted  by a manual screw jack. A stainless steel head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank via a stainless steel end tank.

TYPICAL EXPERIMENTS
  • Flow measurement.
  • Hydraulic jump.
  • Continuity and energy equations.
  • Discharge under sluice gate.
TECHNICAL DATA
Channel size :  75 mm wide, 250 mm high and 3.0 m long or as requested.       
Tilting adjustment :   -2 % to + 5 %.            
Side walls  :  Clear acrylic with clear vertical scale.        
Channel bed :  Stainless steel.            
Flow measurement :  Water meter and stop watch          
Power supply :  220 V 1 Ph 50 Hz. Other power supply is available on request.    
OPTIONAL EQUIPMENT
HF 507-010 Adjustable Bed.            
HF 507-019 Stainless steel hook and point gauge 300 mm with  0.05 mm reading.  
HF 507-019A Stainless steel hook and point gauge 300 mm x 0.5 mm scale.    
HF 507-020      Basic weir plate with stainless steel 60˚V notch and rectangular notch weir attachment. 
HF 507-022   Sharp crested weir.            
HF 507-023 Broad crested weir sharp edges.        
HF 507-023A Round edge attachment for HF507-023.        
HF 507-024  Crump weir.             
HF 507-025 Trapezoidal weir.            
HF 507-030 Ogee weir consisting of base profile unit with both upstream and downstream 
  pressure tappings and manometer board.        
HF 507-031 Dam spillway consisting of base profile unit with different interchangeable downstream sections :
-  Toe ski jump piers and pegs gravel box or stop logs.        
HF 507-033 Syphon spillway made from clear acrylic and PVC.      
HF 507-034 Bridge pier round or square          
HF 507-035           Culvert fittings round or square edge.        
HF 507-040 Venturi flume made from clear acrylic with stainless steel attachment.  
HF 507-051  Sluice gate sliding type with stainless steel attachment.    
HF 507-052 Radial gate rack and pinion drive with stainless steel attachment.    
HF 507-060 Pitot tube with manometer board for measurement of flow velocity at various channel sections.
HF 507-061 Current meter            
HF 507-070 Roughened bed gravel sand or corrugated.      
HF 507-080 Wave generator with variable speed geared motor.      
HP 010         Flow digital display.            
.Other accessories and models can be supplied on request.        
The flow channel can be supplied without water supply unit i.e. without pump and storage tank. The unit can then    
be used with HB100 Hydraulics Bench with full length storage tank. The channel code is designated as HF507-EM1
                 
Net (unpacked) Shipping Dimensions WxLxH :  70 x 390 x 135 cm      
Net Weight :  Approx. 170 kg