This is a bench top set for studying industrial type axial flow fan characteristics.
The unit consists of a single stage variable pitch axial flow fan and motor, an advanced inverter, inlet and outlet ducts, and instruments for measurement of air flow rate, pressures, and temperature. The unit is on wheels.
Instruction manual is also included.
- Flow rate vs pressure.
- Fan input, output and efficiency.
- Effect of speed on fan performance.
- Effect of impeller pitch angle on fan performance.
- Investigations of velocity distribution.
- Effect of guide vane on fan performance (optional).
|- Diameter||380 mm|
|- Impeller construction||
|- Rated maximum flow rate||4,000 m3/h|
|- Rated maximum pressure||35 mm water|
|Inlet duct with inlet cone and flow straightener|
|Outlet duct with flow straightener and damper|
|Speed control||Advanced inverter|
|- Air flow rate||Travelling pitot and inlet cone and inclined water manometer|
|- Differential pressure||Twin inclined water manometer (one for air flow rate), 0-450 mm x 1 mm graduation, multiple slope 1:10, 1:5, 1:2 and 1:1|
|- Fan speed and motor input power||Advanced inverter|
|Power supply||220V 1Ph 50 Hz. Other power supply is available on request.|
|Part No.||Part Name|
|MP 100-011A||Differential pressure digital display (2 required) instead of twin inclined water manometer|
|MP 124-010||Anemometer for flow rate measurement|
|MP 124-010A||Anemometer for flow rate measurement instead of travelling pitot and inclined water manometer|
|MP 124-005||Guide vane for increasing fan output pressure|
|MP 124-006||Second fan and motor unit for Two Stage Axial Flow Fan Test Set|
|MP 124-007||Exhaust silencer|
Sensors with computer interface unit for key data acquisition instead of analog data measuring instruments.
This includes computer interface unit with two differential pressure sensors and a temperature sensor instead of thermometer and twin inclined manometer.
|Net (unassembled) Shipping Dimensions WxLxH||85 x 360 x 130 cm.|
|Net Weight||Approx. 430 kg.|