TH 102 TRAINING BOILER, 200 kg/hr
GENERAL DESCRIPTION

This is a set of steam boiler and standard accessories for a study of boiler performance.

The basic unit consists of a small industrial type boiler with a burner, a feed water system, a fuel system, and instruments for monitoring boiler operation as well as instruments for control and safety. The complete unit is arranged as a package on a pallet for easy site installation. Optional equipment are available for additional experiments.

Instruction manual is also included.

TYPICAL EXPERIMENTS
  • Pressure, temperature and flow measurements.
  • Heat of combustion, heat given to steam and boiler efficiency.
TECHNICAL DATA

The boiler set consists of:

Boiler unit:
 - Type Vertical, water tube
 - Rated output Approx. 125 kW (107,800 kcal/h)
 - Equivalent evaporation  Approx. 200 kg/h steam
 - Measuring instruments Pressure gauge for steam outlet , Temperature for feed water, outlet steam and exhaust stack
 - Safety devices Safety valve , Low level alarm
 - Boiler accessories Steam pressure regulator , Steam separator , Feed water pump , Stack, 2x 2.4 m stainless steel with elbows
Burner:
 -  Type Forced draft, pressure atomized
 -  Control On-Off
 -  Fuel Diesel or kerosene (LPG is available as an option)
Fuel system Fuel tank, fuel meter and oil strainer.
Feed water system Resin filter, soft water tank and water meter.
Power supply 220 V, 1 Ph, 50Hz. Other power supply is available on request.
OPTIONAL EQUIPMENT
A  Condenser and Cooling Tower

   Both condenser and cooling tower should be used together

Part No. Part Name
TH 102-013

Condenser

Description : The unit is used for studying of heat transfer in a heat exchanger as well as recover condensate for reuse. The unit consists of a counter flow steam tube heat exchanger and instruments for measurement of temperatures and cooling water flow rate.

Typical experiment
  - Condenser heat transfer efficiency
Technical data
 -  Type Steam tube
 -  Accessories Cooling water pump condensate transfer pump water meter condensate tank.

 

Part No. Part Name
TH 102-014

Cooling Tower

Description : The unit is used for recovering of condenser cooling water as well as studying of cooling tower efficiency. The cooling tower is to recycle cooling water in case TH102-013 condenser is used. The unit consists of a cooling tower unit a storage tank a circulating pump and temperature gauges.

Typical experiment
 - Cooling tower efficiency

 

B
Part No. Part Name
TH 101-021

Sand filter for water with suspended materials

 

C
Part No. Part Name
TH 101-022

Carbon filter for water with odour or rust

 

D
Portable pH meter

 

Boiler Package
Net (unassembled) Shipping Dimensions WxLxH 180 x 300 x 200 cm.
Net Weight Approx. 800 kg.

 

Cooling Tower
Net (unassembled) Shipping Dimensions WxLxH 110 x 110 x 150 cm.
Net Weight Approx. 95 kg.