TH 137 COMPACT STEAM TURBINE POWER PLANT, 1.5 kW
GENERAL DESCRIPTION

The unit is designed to simulate modern steam power plant. Main components consist of a feed water system, a small industrial boiler, a steam turbine, a generator and lamp load, a condenser with a condensate tank and a pump, and a cooling tower. Accessories such as fuel tank, fuel flow meter, feed water meter, and a stack are also included. Instruments are provided for measurement of pressures, temperatures, output voltage and current.

Instruction manual is also included.

TYPICAL EXPERIMENTS
  • Measurement of feed water and fuel flow rates.
  • Boiler efficiency, turbine generator efficiency, and overall power plant efficiency.
  • Condenser heat transfer efficiency.
  • Cooling tower efficiency. Rankine cycle efficiency.
TECHNICAL DATA

The boiler set consists of:

A . Boiler Unit:
 - Type Vertical, water tube
 - Rated heat output 188 kW (162,000 kcal/h)
 - Equivalent evaporation Approx. 300 kg/h steam
 - Maximum working pressure 10 kg/cm2 (0.98 MPa)
 - Measuring instruments
  • Pressure gauge for steam outlet
  • Temperature sensors for feed water, boiler outlet and exhaust stack (including ambient temperature)
 - Safety devices
  • Safety valve
  • Level gauge and switch at boiler
  • Low level alarm
 - Boiler accessories
  • Steam separator
  • Steam pressure regulator
  • Stack, 2 x 2.4 m stainless steel with elbows
Burner:
 - Type Forced draft, pressure atomized
 - Control On-Off
 - Fuel Diesel or kerosene (LPG is available as an option.)
Fuel system Stainless steel fuel tank, fuel strainer and fuel meter
Feed water system:
 - Resin filter for public water.
 - Soft water tank. Stainless steel
 - Water meter for steam rate monitoring
Power supply 380 V, 3 Ph, 50Hz. Other power supply is available on request.

 

B . Steam Turbine
 - Type Single stage, twin nozzle impulse turbine
 - Maximum electrical output Approx. 0.9 kW
Measuring instruments:
 - Speed sensor for turbine
 - Temperature sensors for steam inlet and outlet
 - Pressure gauge for steam inlet
 - Water manometer for turbine outlet

 

C . Generator and Lamp Load
Voltage 220V, 1 Ph, 50 Hz.
Load lamps 1 set.
Measuring instruments

 

D . Condenser and Cooling Tower
TH 102-013

Condenser

Description : The unit allows a study of heat transfer in a heat exchanger as well as recover condensate for reuse.

 - Type Steam tube
 - Accessories and instruments
  • Cooling water pump
  • Condensate transfer pump
  • Water meter
  • Condensate tank : Stainless steel
  • Temperature sensors for cooling water inlet and outlet
  • Strainer
TH 137-014

Cooling Tower

Description : This is an educational unit for recovering of condenser cooling water as well as studying of cooling tower efficiency.

 

OPTIONAL EQUIPMENT
Part No. Part Name
TH 101-021 Sand filter for water with suspended materials
TH 101-022 Carbon filter for water with odour or rust
TH 101-031 Pressure digital display
TH 101-032 Fuel flow totalizer
TH 101-033 Feed water flow totalizer
TH 101-035 Cooling water flow digital display
PH meter  
TH 137-005EBA Electric boiler instead diesel boiler
TH 136-015 Water Brake Dynamometer (HD160S)
TH 137-020

Electric Super Heater

Description : The unit provides superheated steam for other use such as for a stream turbine. Saturated steam from the boiler is further heated in the electric super heater. Instruments are provided for Measurement of temperature and pressure. The test is to be carried out at low steam rate and compare thermal efficiency for saturated and superheated steam.

TH 137-050

Computer Interface

Sensors with computer interface unit for key data acquisition instead of analog data measuring instruments.

This comprises:

  • Additional sensors include pressure for boiler and turbine inlet fuel flow instead of fuel meter water flow instead of feed and condenser cooling water meters.
  • Computer interface unit for pressure temperature fuel flow water flow speed voltage and current.
TH 137-060

Computer Control

This comprises:

  • Turbine inlet steam throttle and load control.
  • Additional sensors include pressure for boiler and turbine inlet fuel flow instead of fuel meter water flow instead of feed and condenser cooling water meters.
  • Computer interface unit for pressure temperature fuel flow water flow speed voltage and current.
  • Additional software for control by computer (separately supplied).
Other optional equipment please contact manufacturer ([email protected])

 

Shipping dimensions and weight One 20 ft. containers