CF 200 CYCLONE SEPARATOR
The equipment is for studying the principle of two phase flow using a centrifugal blower.
Powder material is fed by an agitator and a variable speed screw feeder to a Venturi tube. The material is carried by air in the tube to a cyclone where the velocity is reduced and the material is separated and dropped to the bottom.
Instruction manual is also included.
- Velocity profile of air in the transfer tube using a travelling Pitot.
- Observation of material separation in the cyclone.
- Comparison of theoretical expression with test results for pressure loss and material collection efficiency at each air velocity.
|- Type||Centrifugal blower|
|- Maximum air flow rate||Over 6 m3/min|
|- Maximum pressure||Over 180 mm water|
|Cyclone||Clear acrylic and discharge tube|
|- Air flow||Travelling Pitot with water manometer|
|- Pressure||Water manometer for measurement of pressure difference in the transfer tube and the cyclone|
|Power supply||220 V, 1 Ph, 50 Hz. Other power supply is available on request.|
|Net (unassembled) Shipping Dimensions WxLxH||Approx, 75 x 180 x 100 cm.|
|Net Weight||Approx. 180 kg.|